NEW Parallel Evaporator

Posted on: November 30, 2016

A NEW evaporator is now available from BioChromato, up to 10 evaporations in tubes or vials can be performed in parallel without bumping, its also ideally suited for use with DMF and DMSO

Find out more…

Continue reading

Smart Evaporator C10 Evaluation: Anon. C10 reduces capacity issues

Posted on: November 30, 2016

Smart Evaporator C10 Evaluation: Anon. Shared by BioChromato

“No more scrambles for the Smart Evaporator C1,
but now we have the C10!

The Smart Evaporator C10 is now newly introduced to the laboratory of Dr.K.
(interviewed with Dr. “K” in the university “T” in natural product chemistry research)

BioChromato Thank you very much for purchasing the C10.The last time we had a great contribution from you for the testimonial of C1, but again we would be appreciated to know your impression of using the multi-positioned Smart Evaporator.

Dr.K I would also be pleased to do so.

BioChromato I heard that the Smart Evaporator’s been widely used among students, and there was a queue to wait for turn.

Dr.K Yes, the students were waiting for their turn to use the C1.

BioChromato Why did the students prefer to use the C1?

Dr.K I can say that’s because the evaporator is free from bumping. We can hardly collect the fluorescent substance samples once they bump, and also it was too much burden to clean for many times so we had an issue on how to avoid samples to be bumped.

BioChromato I see. So the one single C1 was not enough for the demands of all the students. Then now you’ve selected the multi-positioned C10.

Dr.K That’s right. When I first saw that at one of the conference, I already made my mind. Once I had the budget ready, I decided to purchase that without hesitation.

BioChromato I’m honoured to have your interests from the time you first saw it at the conference. So how is that working at your lab and do you come up with new impressions?
C10 just installed at her lab.

Dr.K When setting up the vials and the Spiral Plugs, it’s very smooth to lift up and down the heating block so I found it’s far easier than the C1. And also the valves are well designed that use the motif of flower or leaf. I think it’s great you are particular about the details too.

BioChromato We appreciate to have your compliments and will be pleased to have further feedbacks again. Thank you very much for your time today.”

Continue reading

The University of Nottingham and their use of the Smart Evaporator

Posted on: November 30, 2016

Interview with Dr Tom McInally at The University of Nottingham as to the benefits of the BioChromato Smart Evaporator

Q What type of laboratory are you in charge of?

A We have been using the Smart Evaporator particularly well in our Medicinal Chemistry teaching module in an undergraduate teaching laboratory where we synthesise and we send samples to our partner laboratory (Industrial Pharma company) for biological screening.

Q Why try the Smart Evaporator?

A To prepare a 3-5mg sample for biological screening in the vials of choice of our partner and 1 mg sample for LCMS analysis

Q How many types of vial are used in conjunction with your smart evaporator?

A Let me show you: From left to right (shown with smart evaporator Spiral Plugs) Larger volume storage vial, Test vial for partner screening system, Recovery vial for NMR samples, usually in DMSO works very well, LCMS vial sent to partner for QC.


Q What are you generally evaporating?

A Final compounds after purification by Flash Chromatography, HPLC, SPE and after Crystallizations too. We find that by dissolving a known amount of compound we can then evaporate to dryness making it easy to get precise amounts of material per vial.

Q What did you use before the Smart evaporator?

A Before we had to use a standard Rotary Evaporator, it was not easy to do. We made a special adapter to fit the vials onto the Rotary Evaporator but contamination and bumping was a serious issue. The Smart Evaporator almost totally eliminates these issues. These small samples also tied up the Rotary Evaporator for long periods of time when it was more often needed (and suitable for) for large volume flask evaporation. We also found removing DMSO almost impossible with the Rotary Evaporator where as in the Smart Evaporator it works well.

Q Have you tried round Bottom Flask evaporation?

A Yes in small flasks of 25ml round bottom flasks it works well, especially taking water/methanol samples to dryness after SPE

Q Other post synthesis benefits?

A Allows ease to swap solvents so for instance removing Acetonitrile andDMF for ease of work up

Q What scales are you generally working on?

A 2-50mg per ml

Q How easy has it been to use the Smart evaporator?

A Undergraduate students have found it very easy to use unsupervised, they have also been very keen to continue using the Smart evaporator as its proven much easier to use than the Rotary Evaporators.

Find out more about the Smart Evaporator

Continue reading

Smart Evaporator C10 Evaluation: Anon, Analysis Div Chemical Manufacturer

Posted on: November 30, 2016

Smart Evaporator C10 Evaluation:  shared by BioChromato

“We are now able to concentrate multiple samples of water and mixed solvents, which had been necessary as a pre-processing step in component analysis, with just this one single instrument!” Mr O, member of the analysis team in the pharmaceutical products division of a chemical manufacturer says 

“In the past, we had to use numerous instruments to do our work—freeze-dryers, centrifugal evaporators, nitrogen blowers, and rotary evaporators—and we had to use different instruments for different samples. . . The great thing about the Smart Evaporator is that we can do everything at the pre-processing stage with just this one machine, no matter how much or which types of solvent we want to evaporate! This has allowed us to reduce the time required for a single operation by over 4 hours.”

“For liquid-liquid extraction, we sometimes use solvents like chloroform or hexane, and it’s surprising how few instruments out there can handle these substances. That makes the C10 all the more valuable.”

“The fact that the vacuum pump requires no oil changes, and that we can perform concentration as is, even with organic solvents, is a particularly attractive feature of the C10.”

“After we actually installed the C10, we were able to handle many different samples with just this single instrument, which increased our productivity as we were expecting. In the past, when using a freeze-dryer for solvents such as water, we had to keep an eye on things for an hour or so after starting, to make sure there was no bumping. Then, we would let the evaporation process take place overnight, but in some cases it still wasn’t finished the following morning.”

(Vessels used: 50-ml screw-cap vial; 10-ml screw-cap test tube. Solvents used: water; mixed solvents such as water mixed with acetonitrile or methanol. Sample volume: from less than 1 ml to as much as 150 ml or so.)

Continue reading
Parallel Synthesis Blog

Parallel Synthesis

Posted on: October 17, 2016

Back in the 1990’s I was involved in the “boom” and desire by many research chemistry leaders to make as many compounds as possible. Combinatorial chemistry was a huge buzz term. Read on to see how this affects the tools we now offer. Continue reading

Nacreous Clouds and Our Environment

Posted on: February 4, 2016

Nacreous Clouds appear over the UK, this unusual phenomenon so far South made me think about the environment that we live in and also how at Asynt we work with scientists to make for greener working facilities. Continue reading


Posted on: September 22, 2015

Martyn Fordham travels to the Isle of Skye to finally experience the Aurora; with some stunning photographs of this natural phenomenon and a look at how it occurs we also share some interesting and informative websites on the topic. Continue reading

Achema 2015 Asynt with Porvair

Achema 2015

Posted on: June 29, 2015

We recently attended Achema, the industry extravaganza for chemistry and biology. See what we discovered there! Continue reading